Website designed by DKGRAPHICS Copyright 2009
K6F designed Traction bar setup. Using AFCO chromoly rod ends and steel swaged tubes. This setup uses the added strength of a custom rear cross member made from 1" OD DOM Tubing, and extra cross brace linking the control arms. This adds strength and rigidity in the control arms, controlling wheel hop.
Highlight:
Chromoly Rod Ends
AFCO Swagged Tubes
Grade 8 Hardware
1.0 DOM Tubeing
Reinforced Traction Bars
^^Please use the online shop tab to return to parts index.
|
|
|
|
The cross member part of the setup allows for 1inch extra clearance vs. the stock cross member.
The new design in control arm brackets eliminates chances of fatigue vs. previous styles. 3 mounting points insure these brackets never loosen up over time or cause damage from over tightening. The brackets also allow for more clearance inside the rim.
This setup is 90% bolt on, 2 -3/8 holes are required to be drilled in the control arms. These holes are in the exact position as previous style traction bars.
This traction bar setup is a K6F custom. It is completely constructed of DOM tubing 1.0 & 1.25 diameter & .120thickness. 3/16 Used for the flat steel.
All Hardware is grade8, and all the nuts are self locking and welded on to the assembly.
The Finish is Gloss Black.
note* These were tested with 17" rims. They should work with smaller sizes, however I cannot Guarantee
The new design in control arm brackets eliminates chances of fatigue vs. previous styles. 3 mounting points insure these brackets never loosen up over time or cause damage from over tightening. The brackets also allow for more clearance inside the rim.
This setup is 90% bolt on, 2 -3/8 holes are required to be drilled in the control arms. These holes are in the exact position as previous style traction bars.
This traction bar setup is a K6F custom. It is completely constructed of DOM tubing 1.0 & 1.25 diameter & .120thickness. 3/16 Used for the flat steel.
All Hardware is grade8, and all the nuts are self locking and welded on to the assembly.
The Finish is Gloss Black.
note* These were tested with 17" rims. They should work with smaller sizes, however I cannot Guarantee
