Website designed by DKGRAPHICS Copyright 2009
This is a K6F Custom design. Based off the PMO and PRM designs, but with a K6F added touch.
We used smaller end brackets with 4 mounting points instead of 8. Less material =Less weight, 4 Less bolts = easier installation.
We also added 2 extra mounts to bolt in the stock cross member location under the radiator. This increases strenght and reduces stress on the cross member.
This cross member completely replaces the stock front to back cross member. It is ideal for those planning on running a turbo setup on their KL motor.
Fabricated from All DOM Tubeing, .120 Wall, and 3/16 Flat Steel
We used smaller end brackets with 4 mounting points instead of 8. Less material =Less weight, 4 Less bolts = easier installation.
We also added 2 extra mounts to bolt in the stock cross member location under the radiator. This increases strenght and reduces stress on the cross member.
This cross member completely replaces the stock front to back cross member. It is ideal for those planning on running a turbo setup on their KL motor.
Fabricated from All DOM Tubeing, .120 Wall, and 3/16 Flat Steel
Front Turbo Cross Member
^^Please use the online shop tab to return to parts index.
|
|
|
